SHOP
  • Dealers
http://www.cammomusic.org/main Klonopin drugs.com http://www.wellsborotackleshack.com/index.php/online-purchase Anxiety http://eaca.net/listing/ http://eaca.net/lib/ http://eaca.net/homepage/ Diazpeam panic attack
Portable hardness tester Metaltest
  • Portable hardness tester Metaltest
  • Portable hardness tester Metaltest
  • Portable hardness tester Metaltest
  • Portable hardness tester Metaltest
  • Portable hardness tester Metaltest

Portable hardness tester Metaltest

€0.00

Portable Hardness Tester. Rockwell, Superficial Rockwell, Brinell, Vickers, Knoop, Webster, Barcol N mm2. Load cell system.

- Portable hardness tester conforms to standard DIN 50157 / ASTM B-724.
- Compact and pocket portable hardness tester where load forces are applied through a dynamometric load cell.
- Wireless hardness tester with commands and LCD on board, embedded on the top.
- Operative up to 360° degrees of positioning, even upside down without any special setting.
- Operates exactly as standardized Rockwell depth measuring system.
- A diamond indenter ensures precise hardness readings on all surfaces.
- Hardness measurement results automatically displayed in Rockwell, Superficial Rockwell, Brinell, Vickers, Knoop, Webster, Barcol N mm²units. - Hardness tests in laboratory or in loco on tubes, profiles, valves and every bulky or small pieces starting from a thickness of 0.06 mm: small penetration assures excellent results on thin surfaces such as cromium coating or on parts as thin as shave blade profiles.
- Tester's limited weight and the compact size make it an extremely efficient durometer to test any surface, any large or unwieldy item or any already assembled product. The narrow and elongated head is ideal to reach surfaces such as the inner parts of castings or of finished housings.
- Memory data and Average means is calculate
- Calibration for direct and indirect method conforms to ASTM E 18 E384 E10 ISO 6508 6507 6506
- Powered by rechargeable battery for 100% portability of the hardness tester.

It is extremely handy and easy to use:
Simply choose the desired hardness scale, put the test probe on the surface and apply a light pressure right down on the handgrip to start the entire test cycle. At the end of the test, the instrument lets out a sound signal and the result immediately appears on the display. At this point the hardness tester is once again ready for a new measurement.

Available variety of accessories to facilitate testing on small or oddly shaped items, on differently shaped samples or on finished items.

As Option: B.Tooth data transmission and remote electronic command including temperature measure, statistic conversion data, dwell time programmable, tolerance range and RS 232 C USB connection.

As Option: Acted by portable vice clamping create with linear bearing guide 30 mm open capacity expanding at no limit and interchangeable anvils for round from 1 mm diameter and flat or tubes.

As option: connected to bench support create with linear bearing guider 110 mm height capacity equipped with interchangeable anvils and clamping piece for round part from 1 mm diameter and flat or tubes.

As option: triangular base and magnet foot for secure test on irregular parts.

FORCE RANGE
Preload: 9.807 N (1kgf)
Load: 54.92 N (5 kgf)

FEASIBLE TESTS
Rockwell HRA (20...92); HRB (26...100); HRC (0...80); HR15N (69...93); HR30T (16...83)
Brinell HB5 (5.. .205); HB30 (66...884)
Vickers/Knoop: (13...1865)/(25...97)
Tensile Module R: (226.. .2898); HZA (0...250)
Webster B: 0 / 20 (on request)
Barcol: 0 / 100 (on request)
Leeb unit: (on request)

TECHNICAL DATA
Accuracy : Better than 1%
Temperature Range: From 10 °C to 35 °C
Data Output : RS232 C Standard
Power Supply: 6V + Charger
Software: Affri - OMAG
Principle Of Operation: Dynamometric Load Cell
Conformity Standards: ASTM-E110 / DIN 50157
Measurable Thickness: From 0,06 mm at 2 kgf / From 0,08 mm at 5,6 kgf
Fields Of Use: Hardness tests in laboratory or in loco on tubes, profiles, valves and bulky or small pieces. For all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys. Heat treatment, hardening, nitriding, cementation and hardfacing.
Packing Weight: 4 kg
Packaging Measures: 20 x 30 x 20 cm / 8 x 12 x 8"

Dimension (L x W x H) 30 x 20 x 40 Centimetre
Weight 25 Kilogram