LD Series
  • Dealers
http://www.cammomusic.org/main Klonopin drugs.com http://www.wellsborotackleshack.com/index.php/online-purchase Anxiety http://eaca.net/listing/ http://eaca.net/lib/ http://eaca.net/homepage/ Diazpeam panic attack

NEW!SERIE LD - BRINELL TESTING SOLUTIONS
Digital hardness testers for Brinell and Vickers test method in compliance with ASTM, ISO and JIS hardness standards. Load range from 10 to 3000 kgf. LD 3000 hardness testers are low cost bench hardness testers with high accuracy standards. Really simple to use, just one single button for the entire test. Load forces are applied through load cells and controlled in "Closed Loop" with a frequency of 1 khz, assuring perfect linearity in every range. Hardness tests on all metals: iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys.
 

Only indentation


Brinell hardness tester LD3000

LD 3000

Semi-automatic Brinell hardness tester. Reading of indentation is made through standard microscope or through optional electronic microscope with auto-measure.

Automatic Brinell HBW


Brinell hardness tester LD3000A

LD 3000 A

Automatic Brinell hardness tester with on-board LCD and portable probe. Real Brinell HBW in compliance with ASTM E10 and ISO 6506.

Automatic Brinell HBWT


Brinell hardness tester LD3000B

LD 3000 B

Automatic Brinell hardness tester with depth hardness measurement for Brinell HBWT and Rockwell in compliance with ASTM E18 and ISO 6508. On-board LCD.
 

Hardness testers details

TEST LOADS: from 10 to 3000 kgf (From 98,07 to 29421 N)

FEASIBLE TESTS: (Depending on the models, for more information see the table at the bottom):
Brinell HBW: 1/10 - 1/30 - 2.5/62.5 - 2.5/187.5 - 5/25 - 5/62,5 - 5/125 - 5/250 - 5/750 - 10/100 - 10/250 - 10/500 - 10/1000 - 10/1500 - 10/3000
Brinell HBWT: 2.5/62.5 - 2.5/187.5 - 5/125 - 5/250 - 5/750 - 10/500 - 10/1000 - 10/1500 - 10/3000
Rockwell: HRA - HRB - HRC - HRD - HRF - HRG - HRL - HRM - HRR
Vickers HV 3 - HV 5 - HV 10 - HV: 20 - HV 30 - HV 50 - HV 100 (Only indentation)

 
  • EASY AND FAST AUTOMATIC MEASUREMENTS:
    Spin the leveling screw’s handle and bring your sample to make contact with the clamping hood blocking the piece. Press the START button and the measuring head approaches the sample, applies the load to perform the indentation and goes back upward; all in automatic succession without breaching a phase.
  • CLOSED LOOP TECHNOLOGY (Pat. AFFRI):
    Load forces are applied through load cells and electronically controlled in “Closed Loop” with a frequency of 1 khz, assuring perfect linearity in every range. Range from 10 to 3000 Kgf. Results are not affected by any structural de ection, misalignment, vibration or problems associated with dead weight systems on traditional testers. The tester can also run in an inclined position.
  • SELF COMPENSATING AND CLAMPING SYSTEM (Pat. AFFRI).
    When testing unstable samples or de ective parts, the AFFRI System will follow the sample and not lose contact, compensating any frame dflection during the test cycle. Accurate results are assured even with oiled, dusty or dirty pieces.
  • VERTICAL STROKE:
    The measuring head with indenter has a vertical stroke of 30mm. The indenter head retracts into a protective cylinder at the end of the measurement cycle.

 
New Rockwell Hardness Tester
 
 
 
 

LD 3000 indentation reading

Microscopio Brinell 1

Standard microscope

Supplied microscope for Brinell and Vickers indentation reading (20x, div. 0,01 mm, scale 6 mm).
Brinell Electronic Microscope

Easybrinell (optional)

Electronic microscope for Brinell and Vickers indentation autoreading. Tablet with software. See more...
 
 
 

LD 3000 A automatic reading

Universal hardness tester softwareAutomatic Brinell indentation readingThe preinstalled software controls the whole instrument avoiding setting errors or operators mistakes:
Indentation autoreading through camera and automatic readuot. Powerful software for test cycle managing and automatic indent analyzing. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.
 
 
 

LD 3000 B automatic measurement

Automatic HBWT and Rockwell measurementLD 3000 B - Automatic HBWT and Rockwell measurementThe preinstalled software controls the whole instrument avoiding setting errors or operators mistakes:
Real Brinell HBW and Rockwell measurement in compliance with ASTM E18 E08 and ISO 6506 6508. Powerful software for test cycle managing. Wide settings parameters for measurement setup, image adjustments, statistics and data storage.
 
 
 
 

TECHNICAL FEATURES

 
LD 3000
Standards
EN-ISO 6506-1 / EN-ISO 6507 / EN-ISO 6508-2 / ASTM E-10 / ASTM E-18 / ASTM E-384 / ASTM E-92
Indenter and clamping-hood stroke
30 mm
Elevating screw stroke
150 mm. Removing the elevating screw, the vertical capacity increase till 300 mm for large samples.
Depth capacity
190 mm
Test loads

Brinell: 98.07 - 147.1 - 294.2 - 306.5 - 612.9 - 1839 - 2452 - 4903 - 7355 - 9807 - 29421 N
(10 - 15 - 30 - 31.2 - 62.5 - 187.5 - 250 - 500 - 750 - 1000 - 3000 kgf)

Rockwell (On request): 588.4 - 980.7 - 1471 N (60 - 100 - 150 kgf)
Vickers (On request): 98.07 - 147.1 -294.2 - 490.3 - 980.7 N (10 - 15 - 30 - 50 - 100 kgf)
Feasible tests

LD 3000: Only indentation

LD 3000 A: Automatic indentation reading with onboard LCD and portable probe
Brinell HBW 1/10 - 1/30 - 2.5/62.5 - 2.5/187.5 - 5/25 - 5/62,5 - 5/125 - 5/250 - 5/750 - 10/100 - 10/250 - 10/500 - 10/1000 - 10/1500 - 10/3000
Vickers HV 3 - HV 5 - HV 10 - HV 20 - HV 30 - HV 50 - HV 100 (Only indentation)

LD 3000 B: Automatic Brinell HBWT and Rockwell measurements
Brinell HBWT 2.5/62.5 - 2.5/187.5 - 5/125 - 5/250 - 5/750 - 10/500 - 10/1000 - 10/1500 - 10/3000
Rockwell HRA - HRB - HRC - HRD - HRF - HRG - HRL - HRM - HRR
Vickers HV 3 - HV 5 - HV 10 - HV 20 - HV 30 - HV 50 - HV 100 (Only indentation)

Accuracy
Better than 0.5 %

REQUEST A FREE QUOTE TODAY!

Fill in the form below and we'll get back to you as soon as we can! Please fill in all required fields.
captcha
Ricarica
All information provided will be kept confidential. We will not disclose your personal information to a third party.