250 MRS
ROCKWELL SUPERFICIAL ROCKWELL BRINELL HBWTAutomatic and motorized hardness testing machine in compliance with ASTM and ISO hardness standards. MRS Series are top level bench hardness testers for tough or lab applications. Fully motorized for fully automatic test cycles. Absolute load accuracy (better than 0.1 %) in every condition. Load forces are applied through load cells and electronically controlled in Closed Loop (Pat. Affri). Exact hardness result on the first test and R&R data at the top of his class. See more about this product
330 RSD
ROCKWELL SUPERFICIAL ROCKWELL BRINELL HBWTAutomatic hardness testing machine in compliance with ASTM and ISO standards. RSD Series are bench hardness testers for tough or lab applications. Absolute accuracy (better than 0.5 %) in every condition, accurate measurements even on the first test will eliminate the need for repeated tests. Load forces are applied through a dynamometric load cell which eliminates problems associated with dead weight systems on traditional testers. See more about this product
206 EX
ROCKWELL SUPERFICIAL ROCKWELL BRINELL HBWTSemi-automatic hardness testers in compliance with ASTM and ISO standards. Simple hardness tester with high accuracy standards. To perform the test just act on the elevating screw and bring the sample to make contact with the indenter, pull the lever and within seconds results appear. Load forces are applied through a load cell system. The naked indener allows testing on very small specimens and profiles. See more about this product
LD750 XY
ROCKWELL SUPERFICIAL ROCKWELLBRINELL HBWT BRINELL HBW VICKERS
Super automatic hardness tester for Brinell HB30 10/300 multi testing on metal parts, train wheels, train rails, car parts, iron bars and cast iron parts. The LD 750 is a universal hardness testers for Vickers, Rockwell, Superficial Rockwell and Brinell hardness test methods in compliance with ASTM and ISO hardness standards. Top level bench hardness testers for fully automatic test cycles including indentation autoreading through the high resolution camera. See more about this product
LD 250
ROCKWELL SUPERFICIAL ROCKWELLBRINELL HBWT BRINELL HBW VICKERS
Universal hardness tester for Vickers, Rockwell, Superficial Rockwell and Brinell hardness test methods in compliance with ASTM and ISO hardness standards. LD 250 is a top level bench hardness tester for fully automatic test cycles including indentation autoreading through the high resolution camera. The LD250 allows hardness testing in different hardness scales with just one testers, without the need of several testers in own laboratory. See more about this product
LD 3000
BRINELL HBWBrinell Hardness Tester with test loeds form 10 to 3000kgf for automatic measurements through camera. Simple hardness tester for Brinell HB30 10/3000 in compliance with ASTM and ISO hardness standards. LD 3000 hardness testers are simple bench hardness testers with high accuracy standards. Really simple to use, just one single button for the test. Load forces are applied through load cells and controlled in "Closed Loop" with a frequency of 1 khz. See more about this product
Hardness tests on gears
ROCKWELL SUPERFICIAL ROCKWELL BRINELL HBWTSpecial automatic hardness tester suitable for testing on gear teeth, gear rings and gear shafts. Fully automatic and motorized hardness tester - Automatic test cycle with one button drive - The load precision is controlled via closed loop load cells at 1000Hz (Affri patented) - L.I.S.A. laser pointing system allows perfect positioning at any point - Sliding conveyor table with multiple support bases - Automatic alignment between the indenter and the gear tooth. See more about this product
RSDMAG
ROCKWELL SUPERFICIAL ROCKWELL BRINELL HBWTASTM E-18 E-10 E-110 and ISO 6508 6506
RSDMAG is a digital portable hardness testing machine with automatic test cycle (pre-load and load). Test forces are applied through a dynamometric load cell. Thanks to its magnetic clamping base it is possible to perform hardness tests on very bulky samples directly in the production department. Safe clamping on any surface, from round to flat, with self-allignment of the indenter with the measurement axis. See more about this product
PORTABLE BRINELL 2.5/187.5
ROCKWELL SUPERFICIAL ROCKWELL BRINELL HBWTASTM E-18 E-10 E-110 and ISO 6508 6506
Double magnetic clamping base for Brinell tests at 187.5 kgf with direct reading. Easy and traceable hardness testing on large metal plates, flat rolled steel products and lagre parts. It is completely uninfluenced by direction so that it is operative up to 360° degrees of positioning, even upside down. Load forces are applied through a dynamometric load cell. This hardness tester ensures the highest accuracy and repeatability at every measurement. See more about this product
BK20
BRINELL HBWDIGITAL BRINELL MICROSCOPE ISO 6506 - ASTM E10
BK20 is a Brinell indentation reader for test performed with a ball of Ø 2.5 or 5 or 10 mm. User friendly and compact. Auto light adjustment. Accuracy and repeatability of measurement +/- 1%v. It can be installed on Windows® PC. Export data and images as Jpg, Bmp, pdF, excel, tXt, csV. Create and print reports with results and statistics. Internet connection for remote data network, calibration, service and software updates. See more about this product
METALTESTER MKII
ROCKWELL SUPERFICIAL ROCKWELL BRINELL VICKERSHardness tests in laboratory or in loco on tubes, profiles, valves and every bulky or small pieces starting from a thickness of 0.06 mm: small penetration assures excellent results on thin surfaces such as cromium coating or on parts as thin as shave blade profiles. In compliance with DIN 50157. MKII is a small and light portable hardness tester where load forces are applied through a dynamometric load cell. Operative up to 360° degrees of positioning, even upside down. It is equipped with a LCD operating console with a user friendly interface and extremely easy test settings. See more about this product
METALTEST
ROCKWELL SUPERFICIAL ROCKWELL BRINELL VICKERSCompact and pocket hardness tester version. METALTEST is a wireless hardness tester with comands and LCD incorporated on the top. It is very handy and easy to use: just place the hardness tester on the surface to be examined and press the handgrip right down; release the pressure and the piece hardness immediately appears on the display. See more about this product